mirror of
https://github.com/Start9Labs/start-os.git
synced 2026-03-30 12:11:56 +00:00
47 lines
2.6 KiB
Markdown
47 lines
2.6 KiB
Markdown
# Creating an 0.3.0 Image (Scripted version)
|
||
### This guide assumes a linux environment
|
||
### `Text in this format are commands to run`
|
||
|
||
1. a) Download [ubuntu-21.04-preinstalled-server-arm64+raspi.img.xz](https://ubuntu.com/download/raspberry-pi/thank-you?version=21.04&architecture=server-arm64+raspi)
|
||
|
||
1. b) `unxz ubuntu-21.04-preinstalled-server-arm64+raspi.img.xz` to unzip
|
||
|
||
2. a) Run `git clone https://github.com/Start9Labs/embassy-os` to download the embassy-os repository
|
||
|
||
2. b) Plug in your 16GB microSD card. In this example, we are assuming it will be at /dev/mmcblk0
|
||
|
||
- Find the location of your device with `lsblk` or `fdisk -l`
|
||
|
||
3. a) Run `export OUTPUT_DEVICE=/dev/mmcblk0` where `/dev/mmcblk0` is the sd card’s device name, be sure to change if yours differs
|
||
|
||
3. b) Run `export LOOPDEV=$(sudo losetup --show -fP ubuntu-21.04-preinstalled-server-arm64+raspi.img)` to set the `.img` file as a loop device environment variable
|
||
|
||
4. Run `./build/partitioning.sh` You should see confirmation of write to disk
|
||
|
||
5. Run `./build/filesystems.sh` You will see write progression twice, ignore the warning about lowercase labels
|
||
|
||
6. a) Store a product key as an environment variable in $PRODUCT_KEY, with `export PRODUCT_KEY=test1234`, obviously, this number is made up, but must be 8 alphanumeric characters, then:
|
||
|
||
6. b) `echo $PRODUCT_KEY | sudo tee /mnt/product_key.txt` to add it to the `product_key.txt` file.
|
||
|
||
6. c) `sudo umount /mnt` to unmount again
|
||
|
||
6. d) `sudo mount /dev/mmcblk0p3 /mnt` to mount the writable filesystem
|
||
|
||
7. a) Build EmbassyOS: Move into the EmbassyOS directory with `cd embassy-os` and Build embassy-os (NEEDS UPDATE – PULL LATEST CODE!!!) (for now, `docker run --rm --privileged linuxkit/binfmt:v0.8`, get rust-arm-cross.img and `docker load < rust-arm-cross.img`, then from backend dir: `./build-prod.sh`)
|
||
|
||
7. b) Build UI: First, make sure you have `git`, `node`, and `npm` installed. Then, `cd ui` to enter ui dir, and run `npm i -g @ionic/cli` to install Ionic, `npm i` to install, then `cd ..` to return to the `embassy-os` directory
|
||
|
||
8. a) Run `sudo ./build/copy.sh`
|
||
|
||
8. b) `cat ~/.ssh/id_ed25519.pub | sudo tee -a /mnt/root/.ssh/authorized_keys` copy your ssh key over (assuming it is ~/.ssh/id_ed25519.pub)
|
||
|
||
8. c) `sudo umount /mnt` unmount once again
|
||
|
||
## Time to remove your SD card and insert it into your hardware!! See our [DIY guide](https://docs.start9.com/getting-started/diy.html) if you have not yet put built your device.
|
||
|
||
9. a) Get IP (find by hacking) and visit x.x.x.x:80
|
||
9. b) `ssh root@whateverIP` and run `sudo ./build/initialization.sh` which you currently have to scp over from the `embassy-os` dir
|
||
|
||
10. Do the setup
|