mirror of
https://github.com/Start9Labs/documentation.git
synced 2026-03-30 12:11:57 +00:00
60f83aa683
* change embassyOS to StartOS & nuance * Update conf.py * Update manifest.rst * say start9 instead of embassy in two links * progress * scrubbed faqs - basic-use, lightning, service-packaging, services, startos * add a few fixes * more * more 'embassy' cleanup * more * the last of embassy (aside from sdk and cli commands, links, etc) * some fixes * update icon, logo, and theme * Update site/source/user-manual/upgrade-hardware/upgrade-pro.rst * Update site/source/developer-docs/packaging.rst * Update site/source/developer-docs/specification/config-spec.rst * Update site/source/learn/concepts/networks.rst * Update site/source/learn/concepts/networks.rst * Update site/source/user-manual/customize.rst * Update site/source/support/faq/faq-basic-use.rst * Update site/source/user-manual/upgrade-hardware/naspi-upgrade.rst * Update site/source/user-manual/upgrade-hardware/upgrade-pro.rst * Update site/source/support/faq/faq-bitcoin.rst * Update site/source/support/faq/faq-bitcoin.rst * Update site/source/support/faq/faq-general.rst * Update site/source/support/faq/faq-general.rst * Update site/source/support/faq/faq-general.rst * Update site/source/support/faq/faq-general.rst * Update site/source/support/faq/faq-services.rst * Update site/source/support/faq/faq-general.rst * Update site/source/support/faq/faq-startos.rst * Update site/source/support/faq/faq-troubleshooting.rst * Update site/source/support/faq/faq-startos.rst * Minor fixes * Fix build errors, ready to roll * Add Beethoven * More fixes * More nother fix * More nother fixes agin * Remove sentence * cards instead --------- Co-authored-by: Matt Hill <matthewonthemoon@gmail.com> Co-authored-by: Shadowy Super Coder <musashidisciple@proton.me> Co-authored-by: Lucy Cifferello <12953208+elvece@users.noreply.github.com> Co-authored-by: kn0wmad <39687477+kn0wmad@users.noreply.github.com> Co-authored-by: agent <kn0wmad@protonmail.com>
136 lines
4.7 KiB
ReStructuredText
136 lines
4.7 KiB
ReStructuredText
.. _ssd-upgrade:
|
|
|
|
================
|
|
Upgrade Your SSD
|
|
================
|
|
|
|
This guide will go over how to switch out an old drive on your server to a different drive and transfer the data from the old one to the new one.
|
|
|
|
This will preserve the entire state of your server, including all Tor and LAN addresses as well as channels you have open on the lightning network!
|
|
|
|
This is not the same as backing up services and recovering them onto a new server.
|
|
|
|
#. Start by shutting down your server:
|
|
|
|
.. figure:: /_static/images/walkthrough/shutdown.png
|
|
:width: 50%
|
|
|
|
#. Remove the power and Ethernet cables:
|
|
|
|
.. figure:: /_static/images/hardware-pics/back-no-cables.jpg
|
|
:width: 50%
|
|
|
|
#. Unscrew the two screws here and remove the USB adaptor:
|
|
|
|
.. figure:: /_static/images/hardware-pics/back-screws-usb-loop.jpg
|
|
:width: 50%
|
|
|
|
#. Remove the micro SD card from the front:
|
|
|
|
.. figure:: /_static/images/hardware-pics/front-sd-card.jpg
|
|
:width: 50%
|
|
|
|
#. Remove the bottom four screws:
|
|
|
|
.. figure:: /_static/images/hardware-pics/bottom-screws.jpg
|
|
:width: 50%
|
|
|
|
#. Carefully slide the contents of the case out and disassemble the server by disconnecting the power wire and removing the 5 screws (and 4 brass spacers beneath the fan bracket) highlighted below:
|
|
|
|
.. figure:: /_static/images/hardware-pics/disassembly-0.png
|
|
:width: 50%
|
|
|
|
#. This top section should lift off now and you'll be left with the SSD still attached. Remove the two screws shown below:
|
|
|
|
.. figure:: /_static/images/hardware-pics/disassembly-1.png
|
|
:width: 50%
|
|
|
|
#. Now slide the **old** SSD off the connector:
|
|
|
|
.. figure:: /_static/images/hardware-pics/old-drive-exposed.jpg
|
|
:width: 50%
|
|
|
|
#. Now take the **new** SSD, and connect it where the old one was:
|
|
|
|
.. figure:: /_static/images/hardware-pics/new-ssd-attach-0.png
|
|
:width: 50%
|
|
|
|
#. Secure the SSD with the two silver screws:
|
|
|
|
.. figure:: /_static/images/hardware-pics/disassembly-1.png
|
|
:width: 50%
|
|
|
|
#. Reattach the 4 brass spacers holding the Pi to the SSD board, followed by the 5 black screws to secure the fan bracket and power management board. Then reconnect the power wire:
|
|
|
|
.. figure:: /_static/images/hardware-pics/disassembly-0.png
|
|
:width: 50%
|
|
|
|
#. Now reinsert the server back into the case and reattach the bottom four black screws:
|
|
|
|
.. figure:: /_static/images/hardware-pics/bottom-screws.jpg
|
|
:width: 50%
|
|
|
|
#. Reconnect the USB adaptor and back two black screws:
|
|
|
|
.. figure:: /_static/images/hardware-pics/back-screws-usb-loop.jpg
|
|
:width: 50%
|
|
|
|
#. Flash the micro SD card with a fresh install of StartOS - you can follow the flashing guide :ref:`here <flashing-pi>`
|
|
|
|
#. Once flashed, reinsert the micro SD card into the server:
|
|
|
|
.. figure:: /_static/images/hardware-pics/front-sd-card.jpg
|
|
:width: 50%
|
|
|
|
#. Reconnect the Ethernet cable, make sure the USB adaptor is connect and then finally connect the power cable:
|
|
|
|
.. figure:: /_static/images/hardware-pics/plugged-in-back.jpg
|
|
:width: 50%
|
|
|
|
.. figure:: /_static/images/hardware-pics/plugged-in-front.jpg
|
|
:width: 50%
|
|
|
|
#. Head to http://start.local on any device on the same LAN
|
|
|
|
#. Select "Recover"
|
|
|
|
.. figure:: /_static/images/setup/screen0-startfresh_or_recover.png
|
|
:width: 60%
|
|
|
|
#. Select "Transfer"
|
|
|
|
.. figure:: /_static/images/setup/transfer.png
|
|
:width: 60%
|
|
|
|
#. Now connect the **old ssd** to your server:
|
|
|
|
.. figure:: /_static/images/hardware-pics/attach-ssd.jpg
|
|
:width: 60%
|
|
|
|
#. Select the **old drive** - the one that is externally connect to your server (you may need to hit *REFRESH*):
|
|
|
|
.. figure:: /_static/images/setup/transfer-from.png
|
|
:width: 60%
|
|
|
|
#. Select the drive **inside the server** that you are migrating **to** - this is your **NEW** drive - and any data on this drive will be erased:
|
|
|
|
.. figure:: /_static/images/setup/transfer-to.png
|
|
:width: 60%
|
|
|
|
#. You will be asked to create a password. It can be the same as it was previously:
|
|
|
|
.. figure:: /_static/images/setup/screen5-set_password.png
|
|
:width: 60%
|
|
|
|
#. Your data will now transfer over - the length of this process will vary depending on how much data you have, but will likely take several hours:
|
|
|
|
.. figure:: /_static/images/setup/screen6-storage_initialize.jpg
|
|
:width: 60%
|
|
|
|
#. You are now ready to proceed and use your server with its new drive! It will have the same addresses and root certificate as it did before migrating.
|
|
|
|
.. figure:: /_static/images/setup/screen7-startfresh_complete.jpg
|
|
:width: 60%
|
|
|
|
.. warning:: Do not unders any circumstances use the old SSD to setup another server unless you wipe it first or wipe it during the initial setup proecess! If you have lightning channels you could lose all your funds!
|