Start9/start-os
2
0
Fork 0
mirror of https://github.com/Start9Labs/start-os.git synced 2026-03-26 02:11:53 +00:00
Code Issues Packages Projects Releases Wiki Activity

Bugfix/pi config (#2276)

Browse Source 
* move some install scripts to init

* fix pi config.txt

* move some image stuff to the squashfs build

* no need to clean up fake-apt

* use max temp
This commit is contained in:
Aiden McClelland
2023-05-16 16:06:25 -06:00
committed by GitHub
parent 61445e0b56
commit bdb4be89ff
9 changed files with 146 additions and 223 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
build/lib/depends
View File

@@ -21,6 +21,7 @@ iotop
iw
jq
libavahi-client3
lm-sensors
lvm2
magic-wormhole
ncdu

8
build/lib/scripts/chroot-and-upgrade
View File

@@ -20,16 +20,8 @@ mount --bind /sys /media/embassy/next/sys
mount --bind /proc /media/embassy/next/proc
mount --bind /boot /media/embassy/next/boot
rm /media/embassy/next/usr/local/bin/apt
rm /media/embassy/next/usr/local/bin/apt-get
rm /media/embassy/next/usr/local/bin/aptitude
chroot /media/embassy/next $@
ln -sf /usr/lib/embassy/scripts/fake-apt /media/embassy/next/usr/local/bin/apt
ln -sf /usr/lib/embassy/scripts/fake-apt /media/embassy/next/usr/local/bin/apt-get
ln -sf /usr/lib/embassy/scripts/fake-apt /media/embassy/next/usr/local/bin/aptitude
umount /media/embassy/next/run
umount /media/embassy/next/dev
umount /media/embassy/next/sys

2
build/lib/scripts/postinst
View File

@@ -117,4 +117,4 @@ ln -s /usr/lib/embassy/scripts/dhclient-exit-hook /etc/dhcp/dhclient-exit-hooks.
rm -f /etc/motd
ln -sf /usr/lib/embassy/motd /etc/update-motd.d/00-embassy
chmod -x /etc/update-motd.d/*
chmod +x /etc/update-motd.d/00-embassy
chmod +x /etc/update-motd.d/00-embassy

1
build/raspberrypi/cmdline.txt
View File

@@ -1 +0,0 @@
console=serial0,115200 console=tty1 root=PARTUUID=cb15ae4d-02 rootfstype=ext4 fsck.repair=yes rootwait cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory quiet init=/usr/lib/embassy/scripts/init_resize.sh

86
build/raspberrypi/config.txt
View File

@@ -1,86 +0,0 @@
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Uncomment this to enable infrared communication.
#dtoverlay=gpio-ir,gpio_pin=17
#dtoverlay=gpio-ir-tx,gpio_pin=18
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
# Automatically load overlays for detected cameras
camera_auto_detect=1
# Automatically load overlays for detected DSI displays
display_auto_detect=1
# Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d
max_framebuffers=2
# Run in 64-bit mode
arm_64bit=1
# Disable compensation for displays with overscan
disable_overscan=1
[cm4]
# Enable host mode on the 2711 built-in XHCI USB controller.
# This line should be removed if the legacy DWC2 controller is required
# (e.g. for USB device mode) or if USB support is not required.
otg_mode=1
[all]
[pi4]
# Run as fast as firmware / board allows
arm_boost=1
[all]
gpu_mem=16
dtoverlay=pwm-2chan,disable-bt
initramfs initrd.img-6.1.21-v8+

8
build/raspberrypi/make-image.sh
View File

@@ -61,13 +61,9 @@ sudo unsquashfs -f -d $TMPDIR startos.raspberrypi.squashfs
REAL_GIT_HASH=$(cat $TMPDIR/usr/lib/embassy/GIT_HASH.txt)
REAL_VERSION=$(cat $TMPDIR/usr/lib/embassy/VERSION.txt)
REAL_ENVIRONMENT=$(cat $TMPDIR/usr/lib/embassy/ENVIRONMENT.txt)
sudo cp ./build/raspberrypi/cmdline.txt $TMPDIR/boot/
sudo cp ./build/raspberrypi/config.txt $TMPDIR/boot/
sudo sed -i 's| boot=embassy| init=/usr/lib/embassy/scripts/init_resize\.sh|' $TMPDIR/boot/cmdline.txt
sudo cp ./build/raspberrypi/fstab $TMPDIR/etc/
sudo mkdir -p $TMPDIR/etc/embassy
sudo cp ./build/raspberrypi/config.yaml $TMPDIR/etc/embassy
sudo cp ./build/raspberrypi/init_resize.sh $TMPDIR//usr/lib/embassy/scripts/init_resize.sh
sudo cp ./cargo-deps/aarch64-unknown-linux-gnu/release/pi-beep $TMPDIR/usr/local/bin/beep
sudo cp ./build/raspberrypi/init_resize.sh $TMPDIR/usr/lib/embassy/scripts/init_resize.sh
sudo umount $TMPDIR/boot
sudo umount $TMPDIR
sudo losetup -d $OUTPUT_DEVICE