mirror of
https://github.com/Start9Labs/documentation.git
synced 2026-03-26 02:11:55 +00:00
93 lines
4.3 KiB
ReStructuredText
93 lines
4.3 KiB
ReStructuredText
.. _flashing-os-x86:
|
|
|
|
=============
|
|
StartOS (x86)
|
|
=============
|
|
This guide is for flashing StartOS to a USB drive in order to install it to an x86_64 architecture device. This will include most desktops, laptops, mini PCs, and servers. For an up-to-date list of known-good hardware, please check out this `forum post <https://community.start9.com/t/known-good-hardware-master-list-hardware-capable-of-running-startos/>`_.
|
|
|
|
.. note:: You will need a USB drive of at least 8GB in size
|
|
|
|
Getting StartOS
|
|
---------------
|
|
Visit the `Github release page <https://github.com/Start9Labs/start-os/releases/latest>`_ to find the latest StartOS release.
|
|
|
|
At the bottom of the page, under "Assets," download the ``x86_64.iso`` or ``x86_64-nonfree.iso`` file.
|
|
|
|
-------------------------
|
|
Server Pure (*x86_64.iso*)
|
|
-------------------------
|
|
|
|
The ``x86_64.iso`` image contains no proprietary software and is built especially for the Server Pure.
|
|
|
|
-------------------------------
|
|
Server One (*x86_64-nonfree.iso*)
|
|
-------------------------------
|
|
|
|
The ``x86_64-nonfree.iso`` image contains non-free (closed-source) software. This is needed for the Server One and most DIY hardware, especially for graphics and/or wireless device support.
|
|
|
|
*For a DIY virtual machine build, if using a x86 chip, you'd use the non-free image if the free version does not work for you, but for an Apple Silicon chip you would use* ``aarch64.iso`` *and follow* `this guide <https://blog.start9.com/running-startos-on-apple-silicon/>`_.
|
|
|
|
|
|
.. figure:: /_static/images/flashing/x86_64-asset.png
|
|
:width: 90%
|
|
|
|
Select the client OS you are using to continue:
|
|
|
|
.. tabs::
|
|
|
|
.. group-tab:: Linux
|
|
|
|
(Optional, but recommended) Verify the checksum against the one listed on GitHub (SHA256):
|
|
|
|
.. code-block::
|
|
|
|
sha256sum startos-0.3.4.2-efc56c0-20230525_x86_64.iso
|
|
|
|
.. group-tab:: Mac
|
|
|
|
(Optional, but recommended) Verify the checksum against the one listed on GitHub by opening a terminal, changing your directory to where you downloaded the .iso file, and entering:
|
|
|
|
.. code-block::
|
|
|
|
openssl dgst -sha256 startos-0.3.5.1-39de098_x86_64.iso
|
|
.. group-tab:: Windows
|
|
|
|
(Optional, but recommended) Verify the checksum against the one listed on GitHub by opening Windows PowerShell, changing your directory to where you downloaded the .img.gz file, and running `Get-FileHash`:
|
|
|
|
.. code-block::
|
|
|
|
cd Downloads
|
|
Get-FileHash startos-0.3.4.2-efc56c0-20230525_x86_64.iso
|
|
|
|
Installing StartOS
|
|
------------------
|
|
Once you have the StartOS image, you will need to flash it onto your USB drive.
|
|
|
|
#. Download `balenaEtcher <https://www.balena.io/etcher/>`_ onto your Linux, Mac, or Windows computer.
|
|
|
|
#. Insert your USB drive into your computer.
|
|
|
|
#. Open balenaEtcher.
|
|
|
|
.. figure:: /_static/images/diy/balena.png
|
|
:width: 60%
|
|
:alt: Balena Etcher Dashboard
|
|
|
|
#. Click "Flash from file" and select the ``.iso`` file you just downloaded.
|
|
|
|
#. Click "Select Target" and select your USB drive, checking the size to make sure it's the correct drive.
|
|
|
|
.. warning:: BE ABSOLUTELY CERTAIN you have selected the correct target flash drive. Whatever target you select will be **COMPLETELY ERASED**!!
|
|
|
|
#. Click "Flash!". You may be asked to approve the unusually large disk target and/or enter your password. Both are normal.
|
|
|
|
#. After this completes, you may remove the newly flashed drive from your computer, and insert it into the device you intend to install StartOS onto.
|
|
|
|
#. Plug the USB drive into the device and power on. Follow the on-screen instructions to Install StartOS (use "Re-Install" to preserve data, or "Factory Reset" to wipe the device). After install is complete, you will be prompted to remove your USB drive.
|
|
|
|
.. note:: Always prefer the fastest available USB 3.0+ port - typically this is blue or labeled "SS" (SuperSpeed)
|
|
|
|
.. tip:: Occasionally, you may need to make some changes in your BIOS, such as turning off Secure Boot, or allowing USB boot for install. See the `Community Hub <https://community.start9.com>`_ for guides or to get help.
|
|
|
|
#. Finally, continue to the :ref:`Initial Setup <initial-setup>`, :ref:`Manual Update <manual-update>`, or :ref:`Reset Password <reset-password>` instructions - depending on your need.
|