mirror of
https://github.com/Start9Labs/documentation.git
synced 2026-03-26 10:21:53 +00:00
58 lines
1.9 KiB
ReStructuredText
58 lines
1.9 KiB
ReStructuredText
.. _initial-setup-starting-fresh:
|
|
|
|
=============
|
|
Start Fresh
|
|
=============
|
|
|
|
.. contents::
|
|
:depth: 2
|
|
:local:
|
|
|
|
Setting up a new server
|
|
-----------------------
|
|
|
|
The video below demonstrations how to set up a newly purchased Start9 server. If you are familar with the process or you have recently :ref:`flashed <_flashing>` an existing server, you may want to skip the video and scroll down straight to Step 1.
|
|
|
|
|
|
.. youtube:: DzikmY4S42Y
|
|
:width: 100%
|
|
|
|
|
|
|
|
**First Steps**
|
|
|
|
#. Connect your server to power and ethernet.
|
|
|
|
#. From a client device (desktop/laptop/phone) connected to the same local network as your server, open a browser and visit ``http://start.local``.
|
|
|
|
.. note:: If you are `not` using a Raspberry Pi, you can also plug a monitor and keyboard into the server. This is known as "Kiosk mode" but is not recommedend for general use.
|
|
|
|
#. Follow the on-screen instructions.
|
|
|
|
_________
|
|
|
|
|
|
Start Over
|
|
--------------
|
|
|
|
To `Factory Reset` an existing server, you must first go through the flashing process to reinstall StartOS.
|
|
|
|
#. Flash your device with a fresh install of StartOS by following the :ref:`flashing guides <flashing>`, making sure to select `Factory Reset` when booting from external media.
|
|
|
|
#. After install is complete, you will be prompted to remove your external and restart.
|
|
|
|
.. note:: On a Raspberry Pi, you will `not` remove the microSD card you have flashed, it will remain in the device.
|
|
|
|
#. From a client device (desktop/laptop/phone) connected to the same local network as your server, open a browser and visit ``http://start.local``.
|
|
|
|
#. Choose `Start Fresh` and follow the on-screen instructions.
|
|
|
|
_________
|
|
|
|
|
|
Troubleshooting
|
|
---------------
|
|
If you followed the above instructions and are experiencing issues, click :ref:`here <setup-troubleshoot>` to resolve.
|
|
|
|
You can also to `reach out to support <https://start9.com/contact>`_ if you need a hand.
|