mirror of
https://github.com/Start9Labs/documentation.git
synced 2026-03-26 18:31:53 +00:00
75 lines
3.2 KiB
ReStructuredText
75 lines
3.2 KiB
ReStructuredText
.. _initial-setup:
|
|
|
|
=============
|
|
Initial Setup
|
|
=============
|
|
Follow the instructions below to set up your server for the first time.
|
|
|
|
#. Connect your server to power and Ethernet
|
|
|
|
#. From a client device (desktop/laptop/phone), open a browser and visit ``http://start.local``. Your client must be connected to the same Local Area Network (LAN) as your server. This usually means they are using the same router, either by ethernet or WiFi
|
|
|
|
.. note:: If you are `not` using a Raspberry Pi, you can also plug a monitor and keyboard into the server.
|
|
|
|
#. Select ``Start Fresh``
|
|
|
|
.. figure:: /_static/images/setup/screen0-startfresh_or_recover.jpg
|
|
:width: 50%
|
|
:alt: Fresh Setup
|
|
|
|
#. Select your storage drive. In most cases, there will be only one
|
|
|
|
.. figure:: /_static/images/setup/screen4-select_storage.jpg
|
|
:width: 50%
|
|
:alt: Select Drive
|
|
|
|
#. Create a master password for your server and click ``Finish``
|
|
|
|
.. warning:: Choose a strong master password. Write it down. Store it somewhere safe. DO NOT LOSE IT.
|
|
|
|
.. figure:: /_static/images/setup/screen5-set_password.jpg
|
|
:width: 50%
|
|
:alt: Create New Password
|
|
|
|
#. StartOS will initialize. This can take a few minutes
|
|
|
|
.. figure:: /_static/images/setup/screen6-storage_initialize.jpg
|
|
:width: 50%
|
|
:alt: SSD Initialization
|
|
|
|
#. Click the ``Download`` button to download a file containing the URLs (`.local` and `.onion`) and Root CA of your server. Keep this file for future reference.
|
|
|
|
.. note:: If you connected a monitor, you will `not` see the download button
|
|
|
|
.. figure:: /_static/images/setup/screen7-startfresh_complete.jpg
|
|
:width: 50%
|
|
:alt: Setup Complete
|
|
|
|
#. Setup complete! Click ``Login to StartOS`` to access your new server
|
|
|
|
.. figure:: /_static/images/setup/screen9-startfresh_complete-savedfile-go_to_start_login.jpg
|
|
:width: 50%
|
|
:alt: Setup Complete
|
|
|
|
.. _setup-troubleshooting:
|
|
|
|
Troubleshooting
|
|
---------------
|
|
If you are experiencing issues with setup, try the following:
|
|
|
|
#. Confirm that the server is plugged into both power `and` Ethernet
|
|
#. Confirm your phone/computer is `not` connected to a "Guest" network
|
|
#. Confirm your phone/computer is not using a VPN, or that if you are, that it allows LAN connections, such as the examples below:
|
|
|
|
- Mullvad - Go to "Settings -> VPN Settings -> Local Network Sharing"
|
|
- ProtonVPN - Go to "Preferences -> Connection -> Allow LAN Connections"
|
|
|
|
#. Visit or refresh (ctrl+shift+R - Linux/Windows, cmd+shift+R - Mac) the start.local page in a web browser
|
|
#. To avoid networking issues, it is recommended to use your `primary` router, not an extender or mesh router
|
|
#. Very rarely, your firewall settings may block mDNS. In this case:
|
|
|
|
- From your browser, navigate to your router configuration settings. This is usually an IP address such as 192.168.1.1. A simple web search will usually reveal how to access the router configuration settings for a particular brand.
|
|
- Once in the router config settings, find the section that lists the devices on your network. You should see a device labeled ``start``. Take note of the associated IP address and enter it into your browser's URL field to enter the setup.
|
|
|
|
You can always to `reach out to support <https://start9.com/contact>`_ if you need a hand.
|