.. _reset-password:

===================
Reset Your Password
===================

.. contents::
  :depth: 2
  :local:

#. Obtain the latest copy of EmbassyOS with your product key included, by `downloading it from Github <https://github.com/Start9Labs/embassy-os/releases/latest>`_.
#. Flash the downloaded image to your microSD card, using :ref:`this guide <flashing>`.
#. Insert the microSD card into your Embassy and power it on.

    .. note:: Embassy will power up and then initialize.  Once complete, you will hear a _bep_ to indicate it is initialized and then a _chime_ sound to indicate it is online.

#. On your computer, open up a browser and go to http://embassy.local.
#. When prompted, enter your Product Key:

   .. figure:: /_static/images/setup/migrate0.png
      :width: 60%

#. Select "Recover".

   .. figure:: /_static/images/setup/migrate1.png
      :width: 60%

#. As instructed, plug in your EmbassyOS data drive and you will receive a popup declaring that a valid data drive has been detected. Click "Use Drive" from the pop-up. If you don't see the drive, you may get a message asking you to unplug, then plug back in the drive, and refresh the page.

   .. figure:: /_static/images/setup/use-drive.png
      :width: 60%

#. Wait a moment while it reads the data from your drive.

   .. figure:: /_static/images/setup/pw_reset-s4-importing_drive.jpg
      :width: 60%

#. Enter and confirm a new password of at least 12 characters when prompted.  Save this password somewhere safe.

   .. figure:: /_static/images/setup/pw_reset-s5-set_password.jpg
      :width: 60%

#. Your password change is complete!

   .. figure:: /_static/images/setup/pw_reset-s6-reset_complete.jpg
      :width: 60%