Start9/documentation
2
0
Fork 0
mirror of https://github.com/Start9Labs/documentation.git synced 2026-03-26 02:11:55 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated upgrade, initial setup, diy, and password reset guides (#179)

Browse Source 
* Updated upgrade, initial setup, diy, and password reset guides with new screens/032 flow

* deleting 0.3.1.x series video for now

Co-authored-by: Lucy Cifferello <12953208+elvece@users.noreply.github.com>
This commit is contained in:
gStart9
2022-10-08 01:36:11 +00:00
committed by GitHub
parent 252c1d3509
commit f9e869975e
13 changed files with 67 additions and 64 deletions
Download Patch File Download Diff File Expand all files Collapse all files

31
site/source/user-manual/initial-setup.rst
View File

@@ -8,11 +8,6 @@ Initial Setup
:depth: 2
:local:
Check out the video below, and follow along with the steps in this guide to setup your new Embassy!
.. youtube:: cWFLUH6jrqA
:width: 100%
Powering On
-----------
@@ -51,38 +46,36 @@ Claiming your Device
.. caution:: Sometimes a router will have a "guest WiFi network," which might be different than the network your Embassy is placed on via ethernet.
#. Visit http://embassy.local from your web browser. You will be prompted to enter your :ref:`Product Key<product-key>`. If you purchased a device from Start9, your Product Key is engraved on the bottom of your device.
.. figure:: /_static/images/setup/setup0.png
:width: 60%
:alt: Enter Product Key
.. note::
The product key is used to discover your Embassy's IP address on the Local Area Network using a hashing function and a protocol named :ref:`MDNS (or Zeroconf) <mdns>`.
#. Visit http://embassy.local from your web browser.
#. Select "Start Fresh"
.. figure:: /_static/images/setup/setup1.png
.. figure:: /_static/images/setup/screen0-startfresh_or_recover.jpg
:width: 60%
:alt: Fresh Install
.. note:: The "Recover" button is used for :ref:`migrating from 0.2.x <upgrade-02>` and :ref:`restoring from backup <backup-restore>`.
.. note:: The "Recover" button is used for :ref:`migrating from 0.2.x <upgrade-02>` or :ref:`restoring from backup <backup-restore>`.
#. Select your storage drive. You should only have one drive plugged into your Embassy at this time, but always verify it is what you expect before clicking (such as, is it a 1TB drive?)
.. figure:: /_static/images/setup/setup2.png
.. figure:: /_static/images/setup/screen4-select_storage.jpg
:width: 60%
:alt: Select Drive
#. Create your *permanent* master password and click "Finish".
#. Create a master password for your Embassy and click "Finish".
.. warning:: Choose a strong master password. Write it down. Store it somewhere safe. DO NOT LOSE IT.
.. figure:: /_static/images/setup/setup3.png
.. figure:: /_static/images/setup/screen5-set_password.jpg
:width: 60%
:alt: Enter a New Password
#. The drive will be initialized for a few minutes
.. figure:: /_static/images/setup/screen6-storage_initialize.jpg
:width: 60%
:alt: SSD Initialization
#. Your Embassy is now a private website on the private web! Continue to the section on :ref:`connecting` to learn more about using your Embassy over Tor and LAN.
.. tip:: Click "Download This Page" to save your Embassy address and certificate info on your computer.