mirror of
https://github.com/Start9Labs/documentation.git
synced 2026-03-30 12:11:57 +00:00
Added podcast, Brave ssl
This commit is contained in:
kn0wmad
@@ -15,43 +15,42 @@ By popular demand, we are pleased to present this "Do it Yourself" (DIY) guide f
|
||||
Motivation
|
||||
----------
|
||||
|
||||
There are four reasons you might prefer to build your own Embassy instead of purchasing one from us.
|
||||
There are several reasons you might prefer to build your own Embassy instead of purchasing one from us:
|
||||
|
||||
#. You already own the necessary hardware and would like to re-purpose it.
|
||||
|
||||
#. You live outside the US and want to save on shipping costs.
|
||||
|
||||
#. You do not trust Start9's supply chain.
|
||||
|
||||
#. You do not want to share your shipping address.
|
||||
|
||||
#. You just like building things.
|
||||
#. You already own the necessary hardware and would like to re-purpose it.
|
||||
#. You live outside the US and want to save on shipping costs.
|
||||
#. You do not trust Start9's supply chain.
|
||||
#. You do not want to share your shipping address.
|
||||
#. You just like building things.
|
||||
|
||||
Building an Embassy
|
||||
-------------------
|
||||
|
||||
The first thing you'll need to do is gather the hardware and assemble it.
|
||||
|
||||
Hardware: Components
|
||||
....................
|
||||
|
||||
#. `Raspberry Pi 4B (8GB) <https://raspberrypi.org/products/raspberry-pi-4-model-b/?variant=raspberry-pi-4-model-b-8gb>`_
|
||||
#. `Power supply for Raspberry Pi 4B <https://raspberrypi.org/products/type-c-power-supply/>`_ Make sure this is at minimum 15w and 3.5a.
|
||||
#. Case for Raspberry Pi 4B (`passive cooling recommended <https://www.amazon.com/Geekworm-Raspberry-Aluminum-Passive-Heatsink/dp/B07Z6FYHCH/>`_ `*`)
|
||||
#. Case for Raspberry Pi 4B (`passive cooling <https://www.amazon.com/Geekworm-Raspberry-Aluminum-Passive-Heatsink/dp/B07Z6FYHCH/>`_ is recommended). This means no moving parts and no noise, as a fan is not required.
|
||||
|
||||
.. caution:: If you prefer to use a fan, **DO NOT** use the official Raspberry Pi fan, as it requires the same GPIO pins as the audio speaker. Instead, we recommend `this fan <https://www.amazon.com/Raspberry-iUniker-30x30x7mm-Brushless-RetroFlag/dp/B076H3TKBP/>`_.
|
||||
|
||||
#. A `16GB microSD card <https://amazon.com/SanDisk-Endurance-microSDXC-Adapter-Monitoring/dp/B07NY23WBG/>`_ (no need for bigger). If you have ABSOLUTELY NO data to migrate, you may choose to re-use the card already in your Embassy.
|
||||
#. `GPIO mini speaker/buzzer <https://www.amazon.com/Corporate-Computer-Motherboard-Internal-Speaker/dp/B01527H4W2/>`_ (These often sell out, please let us know if this link needs to be refreshed)
|
||||
#. Ethernet cable
|
||||
#. MicroSD → USB adapter (or you may have a microSD port on your computer)
|
||||
#. An external drive (1TB minimum, 2TB SSD recommended), or an `internal drive <https://www.amazon.com/Crucial-MX500-NAND-SATA-Internal/dp/B078211KBB>`_ with an `USB enclosure <https://www.amazon.com/gp/product/B07T9D8F6C>`_, as sold with our upgrade kits. MUST CONNECT OVER USB 3.0
|
||||
|
||||
`*` If you use a fan, **DO NOT** use the official Raspberry Pi fan, as it requires the same GPIO pins as the audio speaker. Instead, we recommend `this fan <https://www.amazon.com/Raspberry-iUniker-30x30x7mm-Brushless-RetroFlag/dp/B076H3TKBP/>`_.
|
||||
|
||||
Hardware: Assembly
|
||||
..................
|
||||
|
||||
#. Insert mini speaker/buzzer into GPIO pins 6/8/10/12 with the word "speaker" facing out, `away from the board`.
|
||||
|
||||
.. figure:: /_static/images/diy/pins.svg
|
||||
:width: 60%
|
||||
:alt: Speaker board spec
|
||||
.. figure:: /_static/images/diy/pins.svg
|
||||
:width: 60%
|
||||
:alt: Speaker board spec
|
||||
|
||||
#. Place the Raspberry Pi 4 board (with speaker attached), into its case.
|
||||
#. Plug in the external drive to one of the USB 3.0 (blue) slots
|
||||
@@ -59,35 +58,40 @@ Hardware: Assembly
|
||||
Getting EmbassyOS
|
||||
-----------------
|
||||
|
||||
After building your device, you need a copy of EmbassyOS.
|
||||
|
||||
Getting EmbassyOS: Purchasing
|
||||
.............................
|
||||
|
||||
You can purchase EmbassyOS `here <https://store.start9.com/collections/embassy/products/embassyos-software-download>`_. This is by far the easiest path to get up and running.
|
||||
- You can purchase EmbassyOS `here <https://store.start9.com/collections/embassy/products/embassyos-software-download>`_. This is by far the easiest path to get up and running.
|
||||
|
||||
Depending on your Internet speed, the download should take between 5 and 30 minutes.
|
||||
- Depending on your Internet speed, the download should take between 5 and 30 minutes.
|
||||
|
||||
Getting EmbassyOS: Building from Source
|
||||
.......................................
|
||||
|
||||
If you prefer to build EmbassyOS from source, you can do so following our guide on the `Start9 GitHub <https://github.com/Start9Labs/embassy-os/tree/master/build>`_.
|
||||
- If you prefer to build EmbassyOS from source, you can do so following our guide on the `Start9 GitHub <https://github.com/Start9Labs/embassy-os/tree/master/build>`_.
|
||||
|
||||
Installing EmbassyOS
|
||||
--------------------
|
||||
|
||||
Whether you purchase EmbassyOS from us or build it yourself, you need to flash it onto a microSD card.
|
||||
Whether you purchase EmbassyOS from us or build it yourself, you'll need to flash it onto a microSD card.
|
||||
|
||||
#. Download `balenaEtcher <https://www.balena.io/etcher/>`_ onto your Mac, Windows, or Linux computer.
|
||||
#. Insert the microSD card into your computer, either directly or using an adapter.
|
||||
#. Open balenaEtcher.
|
||||
#. Click `Select Image`, then find and select your copy of EmbassyOS.
|
||||
#. Click `Select Target`, then find and select your micro SD card.
|
||||
|
||||
.. warning:: BE CERTAIN YOU SELECT THE CORRECT DISK AS IT WILL BE ERASED AND WRITTEN OVER
|
||||
|
||||
#. Click `Flash!` You may be asked to (1) approve the unusually large disk target or (2) enter your password. Both are normal.
|
||||
|
||||
.. figure:: /_static/images/diy/balena.svg
|
||||
:width: 60%
|
||||
:alt: Balena Etcher Dashboard
|
||||
.. figure:: /_static/images/diy/balena.svg
|
||||
:width: 60%
|
||||
:alt: Balena Etcher Dashboard
|
||||
|
||||
#. Once the image is flashed and verified, you may remove the micro SD, insert it into your Embassy, and power up the device.
|
||||
#. The Embassy is now ready for use, and you may following the normal :ref:`setup <initial-setup>` instructions. ``*``
|
||||
#. The Embassy is now ready for use, and you may continue following the normal :ref:`Initial Setup <initial-setup>` instructions.
|
||||
|
||||
``*`` The first time you power it on, your Embassy will make more noises than future attempts, and it may take several minutes to finally complete.
|
||||
.. note:: The first time you power on your Embassy it may take 10-20 minutes to initialize.
|
||||
|
||||
Reference in New Issue
Block a user