LAN setup, image fixes, misc edits

site/source/support/user-manual/tuning/advanced-config/ssh-setup.rst

@@ -25,4 +25,4 @@ Replacing ``<LAN URL>`` with your Embassy's LAN (``embassy-xxxxxxx.local``) addr
 Connecting via SSH on Windows, using PuTTY
 ------------------------------------------
 
-One of our community members, @brewsbitcoin, has put together this guide for connecting via PuTTY on Windows: https://medium.com/@brewsbitcoin/ssh-to-start9-embassy-from-windows-4a4e17891b5a
+One of our community members, `@brewsbitcoin <https://twitter.com/brewsbitcoin>`_ (https://brewsbitcoin.com/), has put together this `Guide <https://medium.com/@brewsbitcoin/ssh-to-start9-embassy-from-windows-4a4e17891b5a>`_ for connecting via PuTTY on Windows.

site/source/support/user-manual/tuning/diy.rst

@@ -4,7 +4,7 @@
 DIY Guide
 =========
 
-.. figure:: /_static/images/diy/pi.png
+.. figure:: /_static/images/diy/pi.svg
   :width: 40%
   :alt: Raspberry Pi
 
@@ -49,7 +49,7 @@ Hardware: Assembly
 
 #. Insert mini speaker/buzzer into GPIO pins 6/8/10/12 with the word "speaker" facing out, `away from the board`.
 
-   .. figure:: /_static/images/diy/pins.png
+   .. figure:: /_static/images/diy/pins.svg
     :width: 60%
     :alt: Speaker board spec
 
@@ -83,7 +83,7 @@ Whether you purchase EmbassyOS from us or build it yourself, you need to flash i
 #. Click `Select Target`, then find and select your micro SD card.
 #. Click `Flash!` You may be asked to (1) approve the unusually large disk target or (2) enter your password. Both are normal.
 
-   .. figure:: /_static/images/diy/balena.png
+   .. figure:: /_static/images/diy/balena.svg
     :width: 60%
     :alt: Balena Etcher Dashboard